Disconnect Coupling S-Link Bayonet-Type, Coupler, NW 3.5mm, Alu, Seal EPDM, Connector 3/8 Inch 24 UNF

Coupler with 3/8" Connector, S-Link-Type

Designed for racing Stahlbus quick disconnect couplings offer maximum comfort with maximum internal cross-section of 3.5 mm and minimum size. In combination with its counterpart the quick disconnect coupling is absolutely tight without spilling any fluid and  no air can get in.

Technical Data:

•  Nominal diameter: 3,5mm (for Dash 3)
•  Seal: EPDM (resistent against brake fluid)
•  Connecting thread: 3/8" 24 UNF
•  Material: Aluminium
•  Coupling type: Bayonet
•  max. Operating pressure: 220 bar
•  Length in the coupled state:63 mm
•  max. Outer diameter: 15 mm
•  Weight complete coupling: 18 g:
•  Operating temperature: -50 C° bis +150 C°

Delivery:
- Coupler S-Link Type

The complete quick disconnect coupling is always a combination of one nippler and one coupler.
 Please order for a complete quick disconnect coupling the matching nippler separately (f.e. BS03D03E or BP03Dd10E).

Not approved for road traffic!